Adobe Flash Player Wince 6.0
Adobe® Flash® Player is a lightweight browser plug-in and rich Internet application runtime that delivers consistent and engaging user experiences, stunning audio.
Hi, What is required to use the Adobe Flash Lite support built into Windows CE 6.0 R3 to play a.swf file? I've tried creating an html file with a link to the swf but it will not play. The same file will play on a older BSquare R2 release of CE with a stand alone player (saPlayerCE.exe). Since the Adobe Flash Lite support was added the stand alone player is no longer included by BSquare.
Is there an open source player which uses the Windows CE 6.0 R3 support to complete what is needed to play.swf files? I'd like to be able to play Flash Lite content inside or outside the IE browser but I always get a blank screen. Thanks, Chuck Prabu 12.02.10 20:05. Hii Shanty & Prabu, I have html file generated thru flash. I have swf and the images required to support html and swf. Now i have made a new project on winCe 6.0 R3 on platform builder.
And included all the files like html,swf,image in.bib and made make run time image. On emulator its completely blank. Do i need to add any other catalog item for ie or flash.I have just included Adobe flashlite ActiveX Control from catalog. Kiindly help me to run html file on ie winCE Prabu 13.04.10 4:43. Hi Prabu., thnks for the reply. I did the same choose both of the sysgenfrom catalog items.
Did clean sysgen. I checked in console it was coming as sysgeniesample=1;sysgenieflashlite=1 I put the swf and flash generated html in release folder of my workspace. And did make run time image. I didnt do any change with project.bib or platform.bib.
I mean i didnt include swf or html for flatreleasedirectory. Tried opening html file but, it was coming blank with a close mark at the top left corner. And when tried opening swf it shows 'thr is no application with this.Run the application first,then open this file from within the application' Which flash player swf does winCE 6.0 R3 support.I have swf made from flash 8 professional and the html generated from it. Thnks in advance.
On Apr 13, 4:43 pm, 'PrabuMCTS' wrote: Add the following sysgen variables in the OSdesign catalog items for testing the working of.swf file. SYSGENIEFLASHLITE.
Install Wince 6.0 Firmware
SYSGENIESAMPLE After adding the above catalog items select 'Clean Sysgen'.Then download your new binary. With this catalog items you would be able to test the working of swf file in the wince IE browser. - RegardsPrabuPrabu 13.04.10 7:34. I have done wat u told me. But even though this time the swff is coming blank with a cross mark at top left corner. And when i put this swf as 1.swf $(FLATRELEASEDIR) 1.swf NK in project.bib, and did make rum time image. It comes completely blank after opening swf.
What all u included to open it. I have included swf,imagees thats all to release directory. Where did u put ur swf.??? On Apr 13, 7:34 pm, 'PrabuMCTS' wrote: I have used Flash 8 professional only.Try to open the.swf file. Open the Internet explorer. Select File-Open. Choose the.swf file.
Click Ok - RegardsPrabu 'Anupam Bharti' wrote in message Prabu 15.04.10 4:07. I have included all the.swf and all the supported image files in the project.bib file. Make sure your bib entries are updated by looking into release directory ce.bib file.
Make sure your sysgen component is added in the OS binary by checking the following variable in the release directory SysgenSettings.out file. Sysgeniesample=1 sysgenieflashlite=1 After loading the binary to the emulator you can find the included files in the windows directory of your device. You can open that files in the Ie as i mentioned in the earlier post. Regards, Prabu 'Anupam Bharti' wrote in message news:2b02ee23-0510-425f-b974-6ad0a03cc19f@g30g2000yqc.googlegroups.com.
Anupam Bharti 15.04.10 5:27. Unfortunately i can see only a cross mark at left corner after opening 1.swf I did:- 1. Checked the boxes for Adobe flash lite ActiveX control and internet explorer 6.0 browser sample. I mean i included these two. Clean sysgen.
Copy the.swf file and image to release directory. Wrote 1.swf $ (FLATRELEASEDIR) 1.swf NK image4.jpg $ (FLATRELEASEDIR) image4.jpg NK in project.bib.
4.Did make run time image. 5.checked sysgen.out file, it is sysgeniesample=1 sysgenieflashlite=1 6.Checked ce.bib file, those swf and image files were included as its thr in project.bib 7.
Attach device. Emulator opened. Clicked on ie. Then file- open, then browse to windows directory.
Changes the option for html file to all files. Clicked on 1.swf and pressed OK. But the image is not opening.:-( Kindly Help me where am i wrong in the entire process. On Apr 15, 4:07 pm, 'PrabuMCTS' wrote: I have included all the.swf and all the supported image files in the project.bib file. Make sure your bib entries are updated by looking into release directory ce.bib file.
Make sure your sysgen component is added in the OS binary by checking the following variable in the release directory SysgenSettings.out file. sysgeniesample=1 sysgenieflashlite=1 After loading the binary to the emulator you can find the included files in the windows directory of your device. You can open that files in the Ie as i mentioned in the earlier post. - Regards, unk.@googlegroups.com 15.04.10 5:27 Anupam Bharti 15.04.10 5:45. Unfortunately i can see only a cross mark at left corner after opening 1.swf I did:- 1. Checked the boxes for Adobe flash lite ActiveX control and internet explorer 6.0 browser sample.
I mean i included these two. Clean sysgen. Copy the.swf file and image to release directory. Wrote 1.swf $ (FLATRELEASEDIR) 1.swf NK image4.jpg $ (FLATRELEASEDIR) image4.jpg NK in project.bib. 4.Did make run time image. 5.checked sysgen.out file, it is sysgeniesample=1 sysgenieflashlite=1 6.Checked ce.bib file, those swf and image files were included as its thr in project.bib 7.
Attach device. Emulator opened.
Clicked on ie. Then file- open, then browse to windows directory. Changes the option for html file to all files. Clicked on 1.swf and pressed OK.
But the image is not opening.:-( Kindly Help me where am i wrong in the entire process. On Apr 15, 4:07 pm, 'PrabuMCTS' wrote: I have included all the.swf and all the supported image files in the project.bib file. Make sure your bib entries are updated by looking into release directory ce.bib file. Make sure your sysgen component is added in the OS binary by checking the following variable in the release directory SysgenSettings.out file. sysgeniesample=1 sysgenieflashlite=1 After loading the binary to the emulator you can find the included files in the windows directory of your device. You can open that files in the Ie as i mentioned in the earlier post. - Regards, Anupam Bharti 15.04.10 5:52.
Unfortunately i can see only a cross mark at left corner after opening 1.swf I did:- 1. Checked the boxes for Adobe flash lite ActiveX control and internet explorer 6.0 browser sample. I mean i included these two. Clean sysgen. Copy the.swf file and image to release directory. Wrote 1.swf $ (FLATRELEASEDIR) 1.swf NK image4.jpg $ (FLATRELEASEDIR) image4.jpg NK in project.bib. 4.Did make run time image.
5.checked sysgen.out file, it is sysgeniesample=1 sysgenieflashlite=1 6.Checked ce.bib file, those swf and image files were included as its thr in project.bib 7. Attach device.
Emulator opened. Clicked on ie.
Then file- open, then browse to windows directory. Changes the option for html file to all files.
Clicked on 1.swf and pressed OK. But the image is not opening.:-( Kindly Help me where am i wrong in the entire process. On Apr 15, 4:07 pm, 'PrabuMCTS' wrote: I have included all the.swf and all the supported image files in the project.bib file. Make sure your bib entries are updated by looking into release directory ce.bib file. Make sure your sysgen component is added in the OS binary by checking the following variable in the release directory SysgenSettings.out file. sysgeniesample=1 sysgenieflashlite=1 After loading the binary to the emulator you can find the included files in the windows directory of your device.
You can open that files in the Ie as i mentioned in the earlier post. - Regards, Anupam Bharti 15.04.10 5:53. Unfortunately i can see only a cross mark at left corner after opening 1.swf I did:- 1.
Checked the boxes for Adobe flash lite ActiveX control and internet explorer 6.0 browser sample. I mean i included these two. Clean sysgen. Copy the.swf file and image to release directory.
Wrote 1.swf $ (FLATRELEASEDIR) 1.swf NK image4.jpg $ (FLATRELEASEDIR) image4.jpg NK in project.bib. 4.Did make run time image. 5.checked sysgen.out file, it is sysgeniesample=1 sysgenieflashlite=1 6.Checked ce.bib file, those swf and image files were included as its thr in project.bib 7. Attach device. Emulator opened. Clicked on ie.
Then file- open, then browse to windows directory. Changes the option for html file to all files. Clicked on 1.swf and pressed OK.
But the image is not opening.:-( Kindly Help me where am i wrong in the entire process. On Apr 15, 4:07 pm, 'PrabuMCTS' wrote: I have included all the.swf and all the supported image files in the project.bib file.
Make sure your bib entries are updated by looking into release directory ce.bib file. Make sure your sysgen component is added in the OS binary by checking the following variable in the release directory SysgenSettings.out file. sysgeniesample=1 sysgenieflashlite=1 After loading the binary to the emulator you can find the included files in the windows directory of your device. You can open that files in the Ie as i mentioned in the earlier post.
- Regards, Decoder 16.04.10 9:50. Hello, Anyone has got any solution for this issue??? Thanks Anant On Friday, February 12, 2010 3:30 PM wlcs15 wrote: HiWhat is required to use the Adobe Flash Lite support built into Windows CE 6.0 R3 to play a.swf file? I have tried creating an html file with a link to the swf but it will not play.
The same file will play on a older BSquare R2 release of CE with a stand alone player (saPlayerCE.exe). Since the Adobe Flash Lite support was added the stand alone player is no longer included by BSquare. Is there an open source player which uses the Windows CE 6.0 R3 support to complete what is needed to play.swf files? I'd like to be able to play Flash Lite content inside or outside the IE browser but I always get a blank screen. ThanksChuck On Friday, February 12, 2010 11:05 PM Prabu Kumar wrote: For enabling the flash support in the OS binary,you need to enable the SYSGENIEFLASHLITE sysgen variable in the catalog item. Since CE 6.0 R3 supports only Flash lite plug-in for the IE browser.To check the flash support in your OS binary you can try browsing some flash supported sites(ex:Youtube). RegardsPrabu On Saturday, April 10, 2010 2:33 PM Shanty wrote: Hi PrabuI have included the catalog item you specified, I built my CE image from R3 with all the updates till Feb 2010.
Yet I cannot play any flash content from youtube or any other site. What do you think may have gone wrong? Shanty 'Prabu Kumar' wrote: On Sunday, April 11, 2010 12:31 AM Shanty wrote: Hi PrabuLet me just add that I tested it on the ARM emulator. I have not yet flashed it to my board. 'Prabu Kumar' wrote: On Monday, April 12, 2010 8:52 AM Anupam Bharti wrote: Hii Shanty & PrabuI have html file generated thru flash.
I have swf and the images required to support html and swf. Now i have made a new project on winCe 6.0 R3 on platform builder. And included all the files like html,swf,image in.bib and made make run time image. On emulator its completely blank. Do i need to add any other catalog item for ie or flash.I have just included Adobe flashlite ActiveX Control from catalog. Kiindly help me to run html file on ie winCE On Tuesday, April 13, 2010 7:43 AM PrabuMCTS wrote: Add the following sysgen variables in the OSdesign catalog items for testing the working of.swf file.
SYSGENIEFLASHLITE. SYSGENIESAMPLE After adding the above catalog items select 'Clean Sysgen'.Then download your new binary. With this catalog items you would be able to test the working of swf file in the wince IE browser.
- RegardsPrabu On Tuesday, April 13, 2010 9:31 AM Anupam Bharti wrote: Hi Prabu.thnks for the reply. I did the same choose both of the sysgenfrom catalog items. Did clean sysgen. I checked in console it was coming as sysgeniesample=1;sysgenieflashlite=1 I put the swf and flash generated html in release folder of my workspace. And did make run time image.
I didnt do any change with project.bib or platform.bib. I mean i didnt include swf or html for flatreleasedirectory.
Tried opening html file but, it was coming blank with a close mark at the top left corner. And when tried opening swf it shows 'thr is no application with this.Run the application first,then open this file from within the application' Which flash player swf does winCE 6.0 R3 support.I have swf made from flash 8 professional and the html generated from it. Thnks in advance. On Tuesday, April 13, 2010 10:34 AM PrabuMCTS wrote: I have used Flash 8 professional only.Try to open the.swf file.
Open the Internet explorer. Select File-Open. Choose the.swf file. Click Ok - RegardsPrabu On Thursday, April 15, 2010 3:37 AM Anupam Bharti wrote: Hiii. I have done wat u told me.
But even though this time the swff is coming blank with a cross mark at top left corner. And when i put this swf as 1.swf $(FLATRELEASEDIR) 1.swf NK in project.bib, and did make rum time image. It comes completely blank after opening swf.
What all u included to open it. I have included swf,imagees thats all to release directory. Where did u put ur swf.???
On Thursday, April 15, 2010 7:07 AM PrabuMCTS wrote: I have included all the.swf and all the supported image files in the project.bib file. Make sure your bib entries are updated by looking into release directory ce.bib file. Make sure your sysgen component is added in the OS binary by checking the following variable in the release directory SysgenSettings.out file. sysgeniesample=1 sysgenieflashlite=1 After loading the binary to the emulator you can find the included files in the windows directory of your device. You can open that files in the Ie as i mentioned in the earlier post.
- RegardsPrabu On Friday, April 16, 2010 12:50 PM Decoder wrote: Can it be update problem of R3,coz of which its not wrking!!!! Submitted via EggHeadCafe C# In Depth Second Edition - An Interview with Jon Skeet.
Attention, Internet Explorer User Announcement: Jive has discontinued support for Internet Explorer 7 and below. In order to provide the best platform for continued innovation, Jive no longer supports Internet Explorer 7. Jive will not function with this version of Internet Explorer. Please consider upgrading to a more recent version of Internet Explorer, or trying another browser such as Firefox, Safari, or Google Chrome. (Please remember to honor your company's IT policies before installing new software!).